TechEd Speedster Motor MountWatch the following videos to make the motor mount and attach it to the car. You will need to use the scroll saw to cut out the shape and use the drill press to drill out the hole for the motor. Make sure that you have the work piece in a vice while using a screw gun. This can help prevent accidents from happening.
|
|
Attaching the MotorThe hole that was drilled for the motor is intentionally drilled bigger then the diameter of the motor. Apply approximately 15" of masking tape around the motor then press the motor into the hole that you drilled out. The tape forms a cushion around the motor that is easily compressed. This allow you to re-position the motor to the correct location.
|
|
